ANNOUNCEMENT OF THE 2025 MARINE CORPS INSTALLATION RANGE CONTROL CERTIFICATIONS SCHEDULE
Date Signed: 10/2/2024 | MARADMINS Number: 449/24
MARADMINS : 449/24

R 301530Z SEP 24
MARADMIN 449/24
MSGID/GENADMIN/CG TECOM QUANTICO VA// 
SUBJ/ANNOUNCEMENT OF THE 2025 MARINE CORPS INSTALLATION RANGE CONTROL
CERTIFICATIONS SCHEDULE// 
REF/A/DOC/CMC/3 MAR 2023// 
NARR/REF A IS MCO 3550.9A WITH ADMINISTRATIVE CHANGE 1, OPERATIONAL
TRAINING RANGE CERTIFICATION-RECERTIFICATION PROGRAM// 
POC1/MR. DEREK SCHAREN/CIV/TECOM RANGE AND TRAINING AREA MANAGEMENT
BRANCH/QUANTICO/TEL: (703)432-0543/E-MAIL: DEREK.SCHAREN@USMC.MIL//
POC2/MR. JARAD OLIVER/CIV/TECOM RANGE AND TRAINING AREA MANAGEMENT
BRANCH/QUANTICO/TEL: (703)784-4433/E-MAIL: JARAD.OLIVER@USMC.MIL//
GENTEXT/REMARKS/1.  Purpose.  Per reference (a), Installation Range
Control Programs will be certified / recertified by Commanding
General (CG) Training and Education Command (TECOM), every three
years.
2.  Background.  The Installation Range Control certification /
recertification will be conducted by a team from CG TECOM (C465)
Range and Training Area Management (RTAM). The range control
operations certification checklist can be found on the Marine Corps
Range and Training Area Management System website within the range
certification module at https:(slant slant)RTAM.TECOM.usmc.mil.
For Calendar Year 2025, Marine Corps Installation Range Control
certification / recertification schedule is as follows:
Date:    Location:
15 JAN – 16 JAN 2025    MCB QUANTICO, VA
23 JAN – 24 JAN 2025    MCLB ALBANY, GA
27 JAN – 28 JAN 2025    MCAS BEAUFORT, SC
30 JAN – 31 JAN 2025    MCRD PARRIS ISLAND, SC
4  FEB – 5  FEB 2025    MCSF, CHESAPEAKE VA
24 FEB – 25 FEB 2025    MCB CAMP LEJEUNE, NC 
27 FEB – 28 FEB 2025    MCAS CHERRY POINT, NC
3.  Details regarding the certification schedule and in-brief will
be emailed to each Installation approximately 30 days before the
planned certification visit.
4.  Scheduling conflicts will be addressed on a case-by-case basis
between the unit's leadership and the TECOM / RTAM points of contact
(POCs).
5.  Installation Commanders will communicate all cancellation
requests via email to the TECOM / RTAM POCs.  
6.  Installation Commanders will receive an out-brief of the
inspection results before the inspection team's departure.  Official
certification report results from TECOM / RTAM will be released
within 30 days from the completion of the inspection.  Should
findings or discrepancies be identified, the Installation Commander
of the Range Control Facility will submit a Corrective Action Plan
(CAP) to CG TECOM within 30-calendar days following receipt of the
certification report.  The CAP is required to be in Naval
correspondence format and provided to the TECOM / RTAM POCs via
email.  The CAP shall document the corrective actions / steps taken
or planned to eliminate the cause(s) preventing the recurrence of
each discrepancy.  Subsequently, every 30-calendar days a status
report from the Installation Range Control will be provided to the
TECOM / RTAM POCs with copies sent to the Installation Commander
until the CAP is complete.  TECOM / RTAM shall determine when the
corrective actions are sufficient to certify or recertify the
Installation Range Control Facility.
7.  The scheduled certification visits are at no cost to the
commands.  Scheduled certification cancellations may require the
canceling unit to fund travel expenses for a rescheduled
certification.  Technical Assist Visits (TAV) are provided to all
commands with ranges and training areas upon request via email to
the TECOM / RTAM POCs.  TAVs are at no cost to commands and are
highly recommended.  
8.  This MARADMIN applies to all Marine Corps Bases, Stations,
and Installations listed in paragraph 2 and reference (a).  
9.  Release authorized by Lieutenant General Benjamin T. Watson,
CG TECOM//